Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Drystar™ 0601 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Drystar™ 0601:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Drystar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - 電気的特性. - 光学特性 - その他の特性. - 機械的特性(ィルム) - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
機械的特性値単位テスト基準
ISO データ
引張弾性率 2100 MPa ISO 527
降伏応力 50 MPa ISO 527
破壊応力 28 MPa ISO 527
破壊ひずみ 100 % ISO 527
曲げ弾性率, 23°C 2000 MPa ISO 178
アイゾット衝撃試験, +23°C N kJ/m² ISO 180/1U
ノッチ付きIzod衝撃強さ, +23°C 6.2 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ 4.2 kJ/m² ISO 180/1A
温度 -40 °C -
パンクチャー衝撃エネルギー, +23ﾟC 44 J ISO 6603-2
ロックウェル硬度 R 109 - ISO 2039-2
ASTM数据
引張弾性率 2100 MPa ASTM D 638
降伏応力 50 MPa ASTM D 638
破壊応力 28 MPa ASTM D 638
破断伸び 130 % ASTM D 638
曲げ弾性率 2100 MPa ASTM D 790
ロックウェル硬度 R 106 - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in 101 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 37 J/m ASTM D 256
温度 -40 °C -
アイゾット衝撃試験, 1/8 in N J/m ASTM D 256
熱的特性値単位テスト基準
ASTM数据
線膨張係数, 平行 51 E-6/K ASTM D 696
DTUL @ 66 psi 70 °C ASTM D 648
DTUL @ 264 psi 64 °C ASTM D 648
ガラス転移温度 80 °C ASTM E 1356
ビカット軟化温度 85 °C ASTM D 1525
熱伝導率, ソリッド 0.0303 W/(m K) ASTM C 177
電気的特性.値単位テスト基準
ASTM数据
耐電圧, 短い時間 16 kV/mm ASTM D 149
誘電正接, 1 MHz 0.02 - ASTM D 150
比誘電率, 1 MHz 2.4 - ASTM D 150
表面抵抗率 1E16 Ohm ASTM D 257
体積抵抗率 1E15 Ohm*cm ASTM D 257
耐アーク 158 s ASTM D 495
光学特性値単位テスト基準
ASTM数据
光沢度 108 - ASTM D 2457
ヘイズ 0.8 % ASTM D 1003
視感透過率 91 % ASTM D 1003
その他の特性.値単位テスト基準
密度. 1270 kg/m³ ISO 1183
吸水率, 24hr 0.13 % ASTM D 570
密度 1270 kg/m³ ASTM D 792
機械的特性(ィルム)値単位テスト基準
ISO データ
トラウザー引裂抵抗, 平行 36 N/mm ISO 6383-1
トラウザー引裂抵抗, 直角 36 N/mm ISO 6383-1
ASTM Data
引張弾性率, 平行 1900 MPa ASTM D 882
引張弾性率, 直角 1900 MPa ASTM D 882
降伏応力, 平行 52 MPa ASTM D 882
降伏応力, 直角 52 MPa ASTM D 882
破壊応力, 平行 59 MPa ASTM D 882
破壊応力, 直角 55 MPa ASTM D 882
降伏点伸び, 平行 4 % ASTM D 882
降伏点伸び, 直角 4 % ASTM D 882
破断伸び, 平行 400 % ASTM D 882
破断伸び, 直角 400 % ASTM D 882
試験片の厚さ 0.25 mm -
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 70 °C -
Pre-drying - Time 6 h -
樹脂温度 250 - 270 °C -
金型温度 15 - 40 °C -
特殊な特性
成形加工法.
射出成形., 異形押出成形., ブロー成形.
特殊な特性.
高耐衝撃及び耐衝撃改良.
な特性
Copolymer
耐薬品性
General Chemical Resistance
Certifications
Food contact
アプリケーション
パッケージング
領域別の利用可能性
アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.