Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DURANEX® 330NF - PBT-GF30 - Polyplastics

Material Data Center offers the following functions for DURANEX® 330NF:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Duranex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
機械的特性値単位テスト基準
ISO データ
引張強度 100 MPa ISO 527
破壊ひずみ 1.7 % ISO 527
曲げ弾性率, 23°C 10100 MPa ISO 178
曲げ強さ 147 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C 7 kJ/m² ISO 179/1eA
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 214 °C ISO 75-1/-2
厚さhでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 0.4 mm -
Yellow Card 可用 はい - -
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
電気的特性.値単位テスト基準
ISO データ
体積抵抗率 3E14 Ohm*m IEC 62631-3-1
表面抵抗率 4E16 Ohm IEC 62631-3-2
耐電圧 22 kV/mm IEC 60243-1
耐トラッキング性 600 - IEC 60112
ASTM数据
耐アーク 128 s ASTM D 495
その他の特性.値単位テスト基準
密度. 1570 kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
金型温度 60 °C -
Zone 1 230 °C -
Zone 2 260 °C -
Zone 3 260 °C -
Injection speed 67 mm/s -
特殊な特性
成形加工法.
射出成形.
特殊な特性.
難燃., Halogen-free, 光安定化., 紫外線安定化., 熱安定化.
Certifications
RoHS
アプリケーション
電気電子
領域別の利用可能性
アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.