Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DURANEX® CN5315N/B - (PBT+PET)-GF15 - Polyplastics

Material Data Center offers the following functions for DURANEX® CN5315N/B:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Duranex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
機械的特性値単位テスト基準
ISO データ
引張強度 103 MPa ISO 527
破壊ひずみ 2.3 % ISO 527
曲げ弾性率, 23°C 6900 MPa ISO 178
曲げ強さ 166 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C 4.9 kJ/m² ISO 179/1eA
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 203 °C ISO 75-1/-2
線膨張係数, 平行 40 E-6/K ISO 11359-1/-2
線膨張係数, 直角 80 E-6/K ISO 11359-1/-2
厚さhでの燃焼性 V-0 class IEC 60695-11-10
Yellow Card 可用 はい - -
電気的特性.値単位テスト基準
ISO データ
耐電圧 20 kV/mm IEC 60243-1
その他の特性.値単位テスト基準
密度. 1500 kg/m³ ISO 1183
特殊な特性
添加剤.
難燃剤.
特殊な特性.
難燃.
な特性
High Gloss
領域別の利用可能性
アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.