Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Eastar™ A150 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Eastar™ A150:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Eastar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
熱的特性 - 光学特性 - その他の特性. - 機械的特性(ィルム)
Any use of this information falls under the rules of our disclaimer.
商品の説明文

Eastar™ A150 Copolyester is a poly(1,4-cyclohexylene-dimethylene terephthalate/isophthalate). It is produced by reacting terephthalic acid and isophthalic acid with the glycol 1,4-cyclohexanedimethanol. Eastar™ A150 is

intended primarily for extrusion into film and sheeting for packaging applications. It has excellent hydrolytic stability and good heat stability. Eastar™ A150 copolyester is lawful for use in food contact applications under food additive regulations published at 21 CFR 177.1240 by the Federal Food and Drug Administration. Therefore, it is lawful for use as a packaging material for meat or poultry foods prepared under federal inspection of the U.S. Department of Agriculture regulations at 9 CFR 318.7 and 381.147.




熱的特性値単位テスト基準
ASTM数据
溶融温度 261 °C ASTM D 3418
ガラス転移温度 91 °C ASTM E 1356
光学特性値単位テスト基準
ASTM数据
光沢度 108 - ASTM D 2457
ヘイズ 0.5 % ASTM D 1003
視感透過率 93 % ASTM D 1003
その他の特性.値単位テスト基準
密度 1200 kg/m³ ASTM D 792
Bulk Density 670 kg/m³ -
機械的特性(ィルム)値単位テスト基準
ASTM Data
引張弾性率, 平行 1600 MPa ASTM D 882
引張弾性率, 直角 1600 MPa ASTM D 882
降伏応力, 平行 43 MPa ASTM D 882
降伏応力, 直角 43 MPa ASTM D 882
破壊応力, 平行 56 MPa ASTM D 882
破壊応力, 直角 56 MPa ASTM D 882
降伏点伸び, 平行 5 % ASTM D 882
降伏点伸び, 直角 5 % ASTM D 882
破断伸び, 平行 250 % ASTM D 882
破断伸び, 直角 250 % ASTM D 882
試験片の厚さ 0.28 mm -
特殊な特性
成形加工法.
フィルム押出成形., シート押出成形.
特殊な特性.
熱安定化., 透明.
な特性
Copolymer
耐薬品性
Hydrolytically Stable
Certifications
Food contact, Food approval FDA 21 CFR
アプリケーション
パッケージング
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.