Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Eastar™ AN004-30 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Eastar™ AN004-30:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Eastar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 光学特性 - その他の特性. - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
商品の説明文

Eastar™ Renew AN004-30 Natural copolyester contains a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding features are its chemical resistance and processing capabilities. Exposure to aromatic oils often causes crazing or actual fracture of many polymer resins, but AN004-30 Natural maintains its physical properties when exposed to these oils, and its appearance is virtually unchanged. Easy to process, it flows readily and fills intricate molds. Its processability coupled with its outstanding chemical resistance makes it

well suited for thick-wall applications.

Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC certified circular content by mass balance allocation.

Renew polymers enable a brand to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.

Processing/Physical Characteristics値単位テスト基準
ASTM数据
成形収縮率., 平行 0.004 mm/mm ASTM D 955
機械的特性値単位テスト基準
ISO データ
引張弾性率 1800 MPa ISO 527
降伏応力 47 MPa ISO 527
降伏ひずみ 4 % ISO 527
破壊応力 46 MPa ISO 527
破壊ひずみ 200 % ISO 527
曲げ弾性率, 23°C 1850 MPa ISO 178
曲げ強さ 65 MPa ISO 178
ノッチ付きIzod衝撃強さ, +23°C 7.8 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ 4.8 kJ/m² ISO 180/1A
温度 -40 °C -
ASTM数据
降伏応力 47 MPa ASTM D 638
破壊応力 51 MPa ASTM D 638
降伏点伸び 5 % ASTM D 638
破断伸び 320 % ASTM D 638
曲げ弾性率 2000 MPa ASTM D 790
ロックウェル硬度 R 103 - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in 80 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 40 J/m ASTM D 256
温度 -40 °C -
アイゾット衝撃試験, 1/8 in N J/m ASTM D 256
熱的特性値単位テスト基準
ASTM数据
DTUL @ 66 psi 73 °C ASTM D 648
DTUL @ 264 psi 65 °C ASTM D 648
光学特性値単位テスト基準
ASTM数据
ヘイズ 0.3 % ASTM D 1003
視感透過率 91 % ASTM D 1003
その他の特性.値単位テスト基準
密度 1200 kg/m³ ASTM D 792
Processing Recommendation Extrusion値単位テスト基準
Pre-drying - Temperature 70 °C -
Pre-drying - Time 3 h -
樹脂温度 230 - 280 °C -
金型温度 15 - 30 °C -
特殊な特性
成形加工法.
その他の押出成形.
納入形状.
ナチュラルカラー
添加剤.
離型剤.
特殊な特性.
高耐衝撃及び耐衝撃改良., 透明.
な特性
Barrier Properties, Heat Sealable, High Gloss, Copolymer
耐薬品性
General Chemical Resistance, Oil Resistance
Certifications
ISCC Plus
アプリケーション
パッケージング
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.