Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Excelloy AK15 (AK102) - (ABS+PA*) - Techno-UMG Co., Ltd.

Material Data Center offers the following functions for Excelloy AK15 (AK102):
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Excelloy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
メルトフローレート, MFI 30 g/10min ISO 1133
温度 260 °C -
荷重 10 kg -
成形収縮率, 平行 0.8 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張強度 41 / 30 MPa ISO 527
曲げ弾性率, 23°C 1610 / 680 MPa ISO 178
曲げ強さ 59 / 32 MPa ISO 178
シャルピー衝撃強さ, +23°C 69 / 76 kJ/m² ISO 179/1eU
ロックウェル硬度 R 101 - ISO 2039-2
ASTM数据
引張強度 42.2 / 30.4 MPa ASTM D 638
曲げ弾性率 1960 / 900 MPa ASTM D 790
曲げ強さ 67.7 / 40.2 MPa ASTM D 790
ロックウェル硬度 R 102 / R 91 - ASTM D 785
その他の特性.乾燥/調湿単位テスト基準
密度. 1060 / - kg/m³ ISO 1183
密度 1060 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 80 - 90 °C -
Pre-drying - Time 2 - 5 h -
金型温度 40 - 80 °C -
Zone 1 240 - 280 °C -
特殊な特性
成形加工法.
射出成形.
特殊な特性.
高耐衝撃及び耐衝撃改良.
耐薬品性
General Chemical Resistance
アプリケーション
電気電子
領域別の利用可能性
北アメリカ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.