Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Fibrolon® 3D Cork - (PLA+Copolyester)-NF - FKuR Kunststoff GmbH

Material Data Center offers the following functions for Fibrolon® 3D Cork:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Fibrolon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Biodegradable compound suitable for the production of 3D printing filaments. Contains Cork fibers.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 3.7 g/10min ISO 1133
温度 190 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 2150 MPa ISO 527
引張強度 39 MPa ISO 527
降伏ひずみ 5.4 % ISO 527
破壊応力 19 MPa ISO 527
破壊ひずみ 18 % ISO 527
シャルピー衝撃強さ, +23°C 60 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 4.6 kJ/m² ISO 179/1eA
熱的特性値単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 155 °C ISO 11357-1/-3
その他の特性.値単位テスト基準
Biobased content 75 % -
Processing Recommendation Extrusion値単位テスト基準
Type of extrusion profile - -
Pre-drying - Temperature 60 °C -
Pre-drying - Time 2 - 4 h -
Processing humidity ≤0.2 % -
Feed temperature 60 °C -
Zone 1 160 °C -
Zone 2 170 °C -
Zone 3 180 °C -
Zone 4 180 °C -
Nozzle temperature 185 °C -
特殊な特性
成形加工法.
異形押出成形., Additive Manufacturing
納入形状.
ペレット., 茶色
Certifications
Contains renewable resources, Biodegradable
アプリケーション
Filament for 3D Printing, おもちゃ
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.