Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of Flomat 595/25 - UP-GF25 - Devi Polymers Private Limited
Material Data Center offers the following functions for Flomat 595/25:
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Flomat datasheets, application examples or technical articles are available in Material Data Center
Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our
disclaimer.
| Processing/Physical Characteristics | 値 | 単位 | テスト基準 |
| Other Standards[S] |
| 成形収縮率, 平行 |
0.2 |
% |
BS-2782 |
| S: | These properties are reported by the producer according standards that are different to our defaults. |
| 機械的特性 | 値 | 単位 | テスト基準 |
| Other Standards[S] |
| 引張強度 |
69 |
MPa |
BS-2782 |
| 曲げ強さ |
157 |
MPa |
BS-2782 |
| 圧縮強度 |
196 |
MPa |
BS-2782 |
| S: | These properties are reported by the producer according standards that are different to our defaults. |
| 熱的特性 | 値 | 単位 | テスト基準 |
| ASTM数据 |
| UL94 燃焼性 |
V-0 |
- |
UL 94 |
| 電気的特性. | 値 | 単位 | テスト基準 |
| ASTM数据 |
| 耐アーク |
185 |
s |
ASTM D 495 |
| Other Standards[S] |
| 表面抵抗率 |
1E9 |
Ohm |
DIN 53482 |
| S: | These properties are reported by the producer according standards that are different to our defaults. |
| その他の特性. | 値 | 単位 | テスト基準 |
| Other Standards[S] |
| 吸水率. |
0.3 |
% |
BS-2782 |
| 密度. |
1700 |
kg/m³ |
BS-2782 |
| S: | These properties are reported by the producer according standards that are different to our defaults. |
特殊な特性
成形加工法.
Compression Molding
納入形状.
シート状成形材料
特殊な特性.
帯電防止.
領域別の利用可能性
アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
