Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Haiplen H50 X2 - PP - Taro Plast S.p.A.

Material Data Center offers the following functions for Haiplen H50 X2:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Haiplen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 10 g/10min ISO 1133
温度 230 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 1700 MPa ISO 527
降伏応力 25 MPa ISO 527
破壊ひずみ >50 % ISO 527
曲げ弾性率, 23°C 1500 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C 3.2 kJ/m² ISO 179/1eA
ASTM数据
ノッチ付きIzod衝撃強さ, 1/8 in 35 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 25 J/m ASTM D 256
温度 -23 °C -
熱的特性値単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 163 °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 65 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 120 °C ISO 75-1/-2
ビカット軟化温度, A 155 °C ISO 306
ビカット軟化温度, B 90 °C ISO 306
1.5mm厚さでの燃焼性 V-2 class IEC 60695-11-10
ASTM数据
UL94 燃焼性 V-2 - UL 94
追加試験片の厚さ 3.2 mm -
酸素指数 26 % ASTM D 2863
その他の特性.値単位テスト基準
吸水率. 0.03 % Sim. to ISO 62
密度. 960 kg/m³ ISO 1183
特殊な特性
特殊な特性.
難燃., 紫外線安定化., 熱安定化.
な特性
Laser Markable, Low Odor, Homopolymer
アプリケーション
自動車, 電気電子
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.