Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of HOPELEN J-160 - PP - Lotte Chemical Corporation

Material Data Center offers the following functions for HOPELEN J-160:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hopelen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics単位テスト基準
ISO データ
メルトフローレート, MFI 16 g/10min ISO 1133
ASTM数据
メルトフローレイト, MFI 16 g/10min ASTM D 1238
機械的特性単位テスト基準
ISO データ
降伏応力 33 MPa ISO 527
破壊ひずみ 100 % ISO 527
曲げ弾性率, 23°C 1320 MPa ISO 178
ASTM数据
降伏応力 35 MPa ASTM D 638
破断伸び 100 % ASTM D 638
曲げ弾性率 1670 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 25 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 20 J/m ASTM D 256
温度 -10 °C -
熱的特性単位テスト基準
ISO データ
荷重たわみ温度, 0.45 MPa 100 °C ISO 75-1/-2
ASTM数据
DTUL @ 66 psi 120 °C ASTM D 648
その他の特性.単位テスト基準
密度. 900 kg/m³ ISO 1183
密度 900 kg/m³ ASTM D 792
特殊な特性
成形加工法.
射出成形.
な特性
Thermal Stability, Homopolymer
アプリケーション
汎用
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.