Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Inzea® F29 HT TF - (PLA+PSAC) - Nurel S.A.

Material Data Center offers the following functions for Inzea® F29 HT TF:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Inzea datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
機械的特性単位テスト基準
ISO データ
引張弾性率 3100 MPa ISO 527
引張強度 57 MPa ISO 527
降伏ひずみ 2.4 % ISO 527
破壊ひずみ 3.5 % ISO 527
曲げ弾性率, 23°C 3300 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C 5.7 kJ/m² ISO 179/1eA
熱的特性単位テスト基準
ISO データ
溶融温度, 10゚C/min 177 °C ISO 11357-1/-3
荷重たわみ温度, 0.45 MPa 60 °C ISO 75-1/-2
その他の特性.単位テスト基準
Biobased content 85 % -
Moisture Content 1 % -
Processing Recommendation Injection Molding単位テスト基準
Pre-drying - Temperature 50 °C -
樹脂温度 200 - 210 °C -
金型温度 100 - 120 °C -
特殊な特性
成形加工法.
射出成形., ブロー成形.
特殊な特性.
熱安定化.
Certifications
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, 堆肥化可能 ISO 13432 (プロデューサー), 堆肥化可能 ISO 13432 (証明書)
領域別の利用可能性
ヨーロッパ., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.