Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of K-Resin® KR53 - SB - INEOS Styrolution

Material Data Center offers the following functions for K-Resin® KR53:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other K-Resin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 光学特性 - その他の特性. - 機械的特性(ィルム)
Any use of this information falls under the rules of our disclaimer.
商品の説明文
K-Resin® KR53 makes a clear, stiff, very tough, high gloss film suitable for applications such as candy twist wrap, shrink sleeves and overwrap.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 10 cm³/10min ISO 1133
温度 200 °C -
荷重 5 kg -
メルトフローレート, MFI 10 g/10min ISO 1133
温度 200 °C -
荷重 5 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 650 MPa ISO 527
シャルピー衝撃強さ, +23°C N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 8 kJ/m² ISO 179/1eA
熱的特性値単位テスト基準
ISO データ
ビカット軟化温度, B 40 °C ISO 306
ASTM数据
ビカット軟化温度 63 °C ASTM D 1525
光学特性値単位テスト基準
ASTM数据
光沢度 140 - ASTM D 2457
ヘイズ 0.2 % ASTM D 1003
その他の特性.値単位テスト基準
吸湿率 0.07 % Sim. to ISO 62
密度 1010 kg/m³ ISO 1183
機械的特性(ィルム)値単位テスト基準
ISO データ
最大ひずみ, 平行 175 % ISO 527-3
最大ひずみ, 直角 180 % ISO 527-3
押出成形のタイプ. blown - -
試験片の厚さ. 0.025 mm -
ASTM Data
降伏応力, 平行 25 MPa ASTM D 882
降伏応力, 直角 20 MPa ASTM D 882
押出成形のタイプ blown - -
試験片の厚さ 0.025 mm -
特殊な特性
成形加工法.
Blown Film Extrusion, フィルム押出成形.
納入形状.
ペレット.
特殊な特性.
透明.
な特性
Heat Sealable, High Gloss, Copolymer
アプリケーション
医療の, パッケージング
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
その他の情報
村遜速揃
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.