Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Kurarity™ LA3710 - TPE - Kuraray Co., Ltd.

Material Data Center offers the following functions for Kurarity™ LA3710:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Kurarity datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - 光学特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
KURARITY is non-crystalline block copolymer and does not have melting point.
All the KURARITY grades show similar low temperature properties which result from Tg of poly (n-butyl acrylate) or poly (n-butyl acrylate/2-ethylhexyl acrylate) and heat resistance from Tg of PMMA.
LA series : n-butyl acrylate based block copolymers.
Suitable Applications: For PSA.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 11 g/10min ISO 1133
温度 190 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
ノッチ付きシャルピー衝撃強さ, +23°C N kJ/m² ISO 179/1eA
引張強度 3.2 MPa ISO 37
ショア硬さA 9 - ISO 7619-1
ショア硬さD 5 - ISO 7619-1
Other Standards[S]
伸び率100%時の応力 0.24 MPa ISO 37
S: These properties are reported by the producer according standards that are different to our defaults.
熱的特性値単位テスト基準
Other Standards[S]
熱伝導率, ソリッド 0.14 W/(m K) ASTM E 1530
S: These properties are reported by the producer according standards that are different to our defaults.
電気的特性.値単位テスト基準
Other Standards[S]
誘電正接, 60 Hz 0.00805 - JIS C 2138
誘電正接, 1 MHz 0.00749 - JIS C 2138
比誘電率, 60 Hz 5.01 - JIS C 2138
比誘電率, 1 MHz 4.93 - JIS C 2138
S: These properties are reported by the producer according standards that are different to our defaults.
光学特性値単位テスト基準
Other Standards[S]
視感透過率 92 % ISO 13468-1
S: These properties are reported by the producer according standards that are different to our defaults.
その他の特性.値単位テスト基準
密度. 1050 kg/m³ ISO 1183
特殊な特性
納入形状.
ペレット.
特殊な特性.
紫外線安定化., 透明.
な特性
Blending Resin, Good Adhesion, Low Odor, Copolymer
耐薬品性
Acid Resistance, Alkali Resistance, Oil Resistance
アプリケーション
自動車, 電気電子
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.