Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LATIGRAY 82-03 CW/96 F3 - PA12-MEF(x) - LATI Industria Termoplastici S.p.A.

Material Data Center offers the following functions for LATIGRAY 82-03 CW/96 F3:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Latigray datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Radiopaque compound.
Processing/Physical Characteristics単位テスト基準
ISO データ
成形収縮率, 平行 0.7 % ISO 294-4, 2577
成形収縮率, 直角 0.7 % ISO 294-4, 2577
機械的特性単位テスト基準
ISO データ
引張弾性率 8900 MPa ISO 527
破壊応力 40 MPa ISO 527
破壊ひずみ 0.8 % ISO 527
シャルピー衝撃強さ, +23°C 10 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 7 kJ/m² ISO 179/1eA
熱的特性単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 105 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 160 °C ISO 75-1/-2
ビカット軟化温度, B 165 °C ISO 306
電気的特性.単位テスト基準
ASTM数据
表面抵抗率 100 Ohm ASTM D 257
体積抵抗率 1000 Ohm*cm ASTM D 257
その他の特性.単位テスト基準
密度. 1080 kg/m³ ISO 1183
Processing Recommendation Injection Molding単位テスト基準
Pre-drying - Temperature 80 - 100 °C -
Pre-drying - Time 3 h -
樹脂温度 250 - 270 °C -
金型温度 70 - 90 °C -
特殊な特性
成形加工法.
射出成形.
Certifications
Food contact
アプリケーション
医療の
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.