Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEONA™ TR161 - PA66 - Asahi Kasei

Material Data Center offers the following functions for LEONA™ TR161:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Leona datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 2400 / 1100 MPa ISO 527
降伏応力 * / 46 MPa ISO 527
降伏ひずみ * / 22 % ISO 527
破壊応力 64 / * MPa ISO 527
破壊ひずみ 15 / * % ISO 527
曲げ弾性率, 23°C 2200 / 100 MPa ISO 178
曲げ強さ 88 / 38 MPa ISO 178
シャルピー衝撃強さ, +23°C N / N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 15 / N kJ/m² ISO 179/1eA
ロックウェル硬度 R 114 - ISO 2039-2
ASTM数据
引張強度 70 / 47 MPa ASTM D 638
破断伸び 20 / 220 % ASTM D 638
曲げ弾性率 2500 / 1400 MPa ASTM D 790
曲げ強さ 98 / 49 MPa ASTM D 790
ロックウェル硬度 R 114 / R 98 - ASTM D 785
Taber耐摩耗性 7 mg/1000 cycles ASTM D 1044
ノッチ付きIzod衝撃強さ, 1/8 in 167 / 1200 J/m ASTM D 256
熱的特性乾燥/調湿単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 66 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 209 / * °C ISO 75-1/-2
ASTM数据
線膨張係数, 平行 70 E-6/K ASTM D 696
DTUL @ 66 psi 225 °C ASTM D 648
DTUL @ 264 psi 77 °C ASTM D 648
その他の特性.乾燥/調湿単位テスト基準
吸湿率 1.9 / * % Sim. to ISO 62
密度 1110 / - kg/m³ ISO 1183
密度 1110 kg/m³ ASTM D 792
特殊な特性
成形加工法.
射出成形., Wire/Cable Extrusion
納入形状.
ペレット.
特殊な特性.
高耐衝撃及び耐衝撃改良., 熱安定化.
アプリケーション
自動車
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.