Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LOXILENE PPC GFCC10 UV3 08040 - PP-GF10 - Loxim Industries Limited

Material Data Center offers the following functions for LOXILENE PPC GFCC10 UV3 08040:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Loxilene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 5.6 g/10min ISO 1133
温度 230 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
降伏ひずみ 6 % ISO 527
破壊応力 45 MPa ISO 527
曲げ弾性率, 23°C 2000 MPa ISO 178
曲げ強さ 56 MPa ISO 178
ノッチ付きIzod衝撃強さ, +23°C 15 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ 12 kJ/m² ISO 180/1A
温度 -30 °C -
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 130 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 150 °C ISO 75-1/-2
その他の特性.値単位テスト基準
密度. 970 kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 80 °C -
Pre-drying - Time 2 h -
Processing humidity ≤0.2 % -
樹脂温度 190 - 230 °C -
金型温度 30 - 65 °C -
特殊な特性
成形加工法.
Pipe/Tube Extrusion, 異形押出成形., ブロー成形., 熱成形.
特殊な特性.
紫外線安定化., 熱安定化.
な特性
Chemically Coupled Reinforcement, Copolymer
耐薬品性
General Chemical Resistance
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.