Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUPOY GN5007FL - (PC+ABS) - LG Chem

Material Data Center offers the following functions for LUPOY GN5007FL:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lupoy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 30 g/10min ASTM D 1238
温度 260 °C -
荷重 5 kg -
成形収縮率., 平行 0.0065 mm/mm ASTM D 955
機械的特性値単位テスト基準
ASTM数据
降伏応力 61.8 MPa ASTM D 638
破断伸び 100 % ASTM D 638
曲げ弾性率 2305 MPa ASTM D 790
曲げ強さ 100 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 707 J/m ASTM D 256
熱的特性値単位テスト基準
ASTM数据
UL94 燃焼性 V-0 - UL 94
追加試験片の厚さ 1.5 mm -
DTUL @ 264 psi 119 °C ASTM D 648
ビカット軟化温度 134 °C ASTM D 1525
その他の特性.値単位テスト基準
密度 1190 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 90 - 100 °C -
Pre-drying - Time 3 - 5 h -
Processing humidity ≤0.02 % -
樹脂温度 270 - 300 °C -
金型温度 60 - 90 °C -
Zone 1 260 - 300 °C -
Zone 2 250 - 290 °C -
Zone 3 250 - 270 °C -
Nozzle temperature 260 - 290 °C -
Screw speed 40 - 70 rpm -
Back pressure 1 - 4 MPa -
特殊な特性
成形加工法.
射出成形.
特殊な特性.
難燃., Halogen-free, 熱安定化.
アプリケーション
IT/ビジネスマシーンズ, 電気電子
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.