Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUPOY PC 1201-18 - PC - LG Chem

Material Data Center offers the following functions for LUPOY PC 1201-18:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lupoy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - 光学特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 18 g/10min ASTM D 1238
温度 300 °C -
荷重 1.2 kg -
成形収縮率., 平行 0.006 mm/mm ASTM D 955
機械的特性値単位テスト基準
ASTM数据
引張弾性率 2340 MPa ASTM D 638
降伏応力 60 MPa ASTM D 638
破壊応力 69 MPa ASTM D 638
降伏点伸び 6 % ASTM D 638
破断伸び 140 % ASTM D 638
曲げ弾性率 2410 MPa ASTM D 790
曲げ強さ 96 MPa ASTM D 790
ロックウェル硬度 M 72 - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in 800 J/m ASTM D 256
アイゾット衝撃試験, 1/8 in N J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
1.5mm厚さでの燃焼性 V-2 class IEC 60695-11-10
試験片の厚さ 1.6 mm -
Yellow Card 可用 はい - -
グローワイヤ着火温度 (GWIT) 850 °C IEC 60695-2-13
GWIT - 試験片の厚さ 2 mm -
ASTM数据
UL94 燃焼性 V-2 - UL 94
追加試験片の厚さ 0.5 mm -
線膨張係数, 平行 68 E-6/K ASTM D 696
DTUL @ 66 psi 143[ann.] °C ASTM D 648
DTUL @ 264 psi 127 °C ASTM D 648
ビカット軟化温度 148 °C ASTM D 1525
酸素指数 26 % ASTM D 2863
ann.: annealed
電気的特性.値単位テスト基準
ISO データ
耐トラッキング性 250 - IEC 60112
ASTM数据
耐電圧, 短い時間 17 kV/mm ASTM D 149
誘電正接, 60 Hz 0.001 - ASTM D 150
比誘電率, 60 Hz 3 - ASTM D 150
体積抵抗率 2E17 Ohm*cm ASTM D 257
光学特性値単位テスト基準
ASTM数据
ヘイズ 1.1 % ASTM D 1003
視感透過率 89 % ASTM D 1003
くっせつりつ 1.59 - ASTM D 542
その他の特性.値単位テスト基準
吸水率, 24hr 0.15 % ASTM D 570
吸水率, 平衡 0.32 % ASTM D 570
密度 1200 kg/m³ ASTM D 792
特殊な特性
成形加工法.
射出成形., その他の押出成形.
添加剤.
離型剤.
特殊な特性.
高耐衝撃及び耐衝撃改良., 熱安定化., 透明.
Certifications
Food contact, Food approval FDA 21 CFR
アプリケーション
パッケージング
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.