Any use of this information falls under the rules of our
disclaimer.
商品の説明文
Carbon Footprint Reduction vs Fossil-Based (3rd party validated): 93 % (ISO 14044)
Attributed Content of ISCC-certified Bio-Circular Sources (min.): 70 %
| Processing/Physical Characteristics | 値 | 単位 | テスト基準 |
| ISO データ |
| メルトボリュームレイト, MVR |
22 |
cm³/10min |
ISO 1133 |
| 温度 |
220 |
°C |
- |
| 荷重 |
10 |
kg |
- |
| 成形収縮率, 平行 |
0.5 |
% |
ISO 294-4, 2577 |
| 機械的特性 | 値 | 単位 | テスト基準 |
| ISO データ |
| 引張弾性率 |
3700 |
MPa |
ISO 527 |
| 降伏応力 |
72 |
MPa |
ISO 527 |
| 破壊ひずみ |
3 |
% |
ISO 527 |
| 曲げ弾性率, 23°C |
3600 |
MPa |
ISO 178 |
| 曲げ強さ |
120 |
MPa |
ISO 178 |
| シャルピー衝撃強さ, +23°C |
16 |
kJ/m² |
ISO 179/1eU |
| シャルピー衝撃強さ, -30ﾟC |
16 |
kJ/m² |
ISO 179/1eU |
| ノッチ付きシャルピー衝撃強さ, +23°C |
2 |
kJ/m² |
ISO 179/1eA |
| ノッチ付きIzod衝撃強さ, +23°C |
2 |
kJ/m² |
ISO 180/1A |
| Ball indentation hardness |
165 |
MPa |
ISO 2039-1 |
| 熱的特性 | 値 | 単位 | テスト基準 |
| ISO データ |
| 荷重たわみ温度, 1.80 MPa |
86[ann.] |
°C |
ISO 75-1/-2 |
| 荷重たわみ温度, 0.45 MPa |
99[ann.] |
°C |
ISO 75-1/-2 |
| ビカット軟化温度, B |
106 |
°C |
ISO 306 |
| 線膨張係数, 平行 |
70 |
E-6/K |
ISO 11359-1/-2 |
| Other Standards[S] |
| 熱伝導率, ソリッド |
0.17 |
W/(m K) |
DIN 52612-1 |
| S: | These properties are reported by the producer according standards that are different to our defaults. | ann.: | annealed |
| 電気的特性. | 値 | 単位 | テスト基準 |
| ISO データ |
| 比誘電率, 100Hz |
3 |
- |
IEC 62631-2-1 |
| 誘電正接, 100Hz |
40 |
E-4 |
IEC 62631-2-1 |
| 誘電正接, 1MHz |
70 |
E-4 |
IEC 62631-2-1 |
| 体積抵抗率 |
1E14 |
Ohm*m |
IEC 62631-3-1 |
| 表面抵抗率 |
>1E15 |
Ohm |
IEC 62631-3-2 |
| 光学特性 | 値 | 単位 | テスト基準 |
| Other Standards[S] |
| くっせつりつ |
1.57 |
- |
ISO 489 |
| S: | These properties are reported by the producer according standards that are different to our defaults. |
| その他の特性. | 値 | 単位 | テスト基準 |
| 吸湿率 |
0.2 |
% |
Sim. to ISO 62 |
| 密度. |
1080 |
kg/m³ |
ISO 1183 |
| Bulk density |
600 |
kg/m³ |
- |
| Processing Recommendation Injection Molding | 値 | 単位 | テスト基準 |
| Pre-drying - Temperature |
80 |
°C |
- |
| Pre-drying - Time |
2 - 4 |
h |
- |
| 樹脂温度 |
220 - 260 |
°C |
- |
| 金型温度 |
40 - 80 |
°C |
- |
| Injection speed |
200 |
mm/s |
- |
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット.
特殊な特性.
熱安定化., 透明.
耐薬品性
General Chemical Resistance
Certifications
Contains renewable resources, Food contact, ISCC Plus
アプリケーション
汎用, パッケージング
領域別の利用可能性
北アメリカ., ヨーロッパ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com
