Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Luran® S 777ME - ASA - INEOS Styrolution

Material Data Center offers the following functions for Luran® S 777ME:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Luran datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - その他の特性. - 機械的特性(ィルム)
Any use of this information falls under the rules of our disclaimer.
機械的特性値単位テスト基準
ASTM数据
降伏応力 46.2 MPa ASTM D 638
破断伸び 27 % ASTM D 638
曲げ弾性率 2158 MPa ASTM D 790
曲げ強さ 68.9 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 128 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 16 J/m ASTM D 256
温度 -40 °C -
熱的特性値単位テスト基準
ISO データ
ビカット軟化温度, A 97.8 °C ISO 306
ASTM数据
DTUL @ 66 psi 97.8 °C ASTM D 648
DTUL @ 264 psi 88.9 °C ASTM D 648
その他の特性.値単位テスト基準
密度 1070 kg/m³ ASTM D 792
機械的特性(ィルム)値単位テスト基準
ASTM Data
引張弾性率, 平行 2160 MPa ASTM D 882
特殊な特性
成形加工法.
異形押出成形., シート押出成形., その他の押出成形., 熱成形.
納入形状.
ペレット.
領域別の利用可能性
北アメリカ., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.