Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Luran® S KR2863C - (ASA+PC) - INEOS Styrolution

Material Data Center offers the following functions for Luran® S KR2863C:
unit conversion, PDF datasheet print, comparison with other plastics, application examples, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Luran datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Luran® S KR2863C is a blend of ASA with PC, shows high heat and high impact resistance and long-term property retention. Its UV resistance is not only sufficient for all kind of interior applications – incl. unpainted surfaces in light colors – but also for exterior parts with medium weatherability requirements. Luran® S KR2863C provides the highest heat performance among the Luran® SC grades and shows a very low residual profile for very sensitive interior applications in e.g. automotive applications.
Processing/Physical Characteristics単位テスト基準
ISO データ
メルトボリュームレイト, MVR 20 cm³/10min ISO 1133
温度 260 °C -
荷重 5 kg -
溶融時の熱伝導率 0.17 W/(m K) -
機械的特性単位テスト基準
ISO データ
引張弾性率 2500 MPa ISO 527
降伏応力 62 MPa ISO 527
降伏ひずみ 4.9 % ISO 527
破壊呼びひずみ >50 % ISO 527
ノッチ付きシャルピー衝撃強さ, +23°C 70 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C 17 kJ/m² ISO 179/1eA
熱的特性単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 109 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 130 °C ISO 75-1/-2
ビカット軟化温度, B 130 °C ISO 306
1.5mm厚さでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 1.5 mm -
Yellow Card 可用 はい - -
その他の特性.単位テスト基準
吸水率 0.6 % Sim. to ISO 62
吸湿率 0.16 % Sim. to ISO 62
密度 1160 kg/m³ ISO 1183
Processing Recommendation Injection Molding単位テスト基準
Pre-drying - Temperature 100 - 110 °C -
Pre-drying - Time 2 - 4 h -
樹脂温度 260 - 300 °C -
金型温度 60 - 90 °C -
機能
 粘度せん断速度. , Luran® S KR2863C, (ASA+PC), INEOS Styrolution
 せん断応力-せん断速度. , Luran® S KR2863C, (ASA+PC), INEOS Styrolution
 せん断弾性率-温度. , Luran® S KR2863C, (ASA+PC), INEOS Styrolution
 応力-ひずみ. , Luran® S KR2863C, (ASA+PC), INEOS Styrolution
 割線弾性率−ひずみ. , Luran® S KR2863C, (ASA+PC), INEOS Styrolution
 応力-ひずみ (等時的). 23°C, Luran® S KR2863C, (ASA+PC), INEOS Styrolution
 クリープ弾性率−時間. 23°C, Luran® S KR2863C, (ASA+PC), INEOS Styrolution
クリープ曲線 23°C, Luran® S KR2863C, (ASA+PC), INEOS Styrolution
 pvT , Luran® S KR2863C, (ASA+PC), INEOS Styrolution
 引張弾性率-温度. , Luran® S KR2863C, (ASA+PC), INEOS Styrolution
特殊な特性
成形加工法.
射出成形., 異形押出成形., シート押出成形., ブロー成形., 熱成形.
納入形状.
ペレット.
添加剤.
離型剤.
特殊な特性.
光安定化., 紫外線安定化., 熱安定化.
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
その他の情報
村遜速揃
PREPROCESSING

Pre-drying, Temperature: 100 - 110°C

Pre-drying, Time: 2 - 4h

PROCESSING

Melt temperature, range: 260 - 300°C

Mold temperature, range: 60 - 90°C

族臓遜造揃
PREPROCESSING

Pre-drying, Temperature: 100 - 110°C

Pre-drying, Time: 2 - 4h

PROCESSING

Melt temperature: 200 - 240°C

促揃臓村促速揃
PREPROCESSING

Pre-drying, Temperature: 100 - 110°C

Pre-drying, Time: 2 - 4h

PROCESSING

Melt temperature: 250 - 280°C

Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.