Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Makroblend® M5005 FR - (PC+PBT)-I FR(40) - Covestro Deutschland AG

Material Data Center offers the following functions for Makroblend® M5005 FR:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Makroblend datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
  • (PC+PBT) blend
  • unreinforced
  • flame-retardant
  • UV-stabilized
  • impact modified
  • injection molding grade. Good impact strength, dimensional stability and excellent chemical resistance. Manufactured according to GMP, Tested only according to ISO 10993-5 and ISO 10993-10 for contact with uncompromised skin only
  • for questions regarding biocompatibility we ask for an email inquiry under plastics@covestro.com.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 35 cm³/10min ISO 1133
温度 260 °C -
荷重 5 kg -
成形収縮率, 平行 0.8 % ISO 294-4, 2577
成形収縮率, 直角 0.8 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
引張弾性率 2300 MPa ISO 527
降伏応力 55 MPa ISO 527
降伏ひずみ 4 % ISO 527
破壊呼びひずみ >50 % ISO 527
曲げ弾性率, 23°C 2350 MPa ISO 178
曲げ強さ 85 MPa ISO 178
シャルピー衝撃強さ, +23°C N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 50 kJ/m² ISO 179/1eA
アイゾット衝撃試験, +23°C N kJ/m² ISO 180/1U
ノッチ付きIzod衝撃強さ, +23°C 45 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ 13 kJ/m² ISO 180/1A
温度 -30 °C -
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 77 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 89 °C ISO 75-1/-2
ビカット軟化温度, B 99 °C ISO 306
線膨張係数, 平行 90 E-6/K ISO 11359-1/-2
線膨張係数, 直角 90 E-6/K ISO 11359-1/-2
厚さhでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 2.4 mm -
Yellow Card 可用 はい - -
その他の特性.値単位テスト基準
密度 1250 kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 80 °C -
Pre-drying - Time ≥4 h -
Processing humidity ≤0.01 % -
樹脂温度 260 °C -
金型温度 70 °C -
特殊な特性
成形加工法.
射出成形.
特殊な特性.
難燃., 高耐衝撃及び耐衝撃改良., 紫外線安定化.
耐薬品性
General Chemical Resistance
Certifications
Biocompatibility ISO 10993
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.