Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Makrolon® 2858 RE - PC - Covestro Deutschland AG

Material Data Center offers the following functions for Makrolon® 2858 RE:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Makrolon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - 光学特性 - その他の特性. - 試験片の成形条件. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
  • MVR (300 °C/1.2 kg) 9.0 cm³/10 min
  • medical devices
  • suitable for ETO and steam sterilization at 121 °C
  • biocompatible according to many ISO 10993-1 test requirements
  • medium viscosity
  • easy release
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 9 cm³/10min ISO 1133
温度 300 °C -
荷重 1.2 kg -
メルトフローレート, MFI 10 g/10min ISO 1133
温度 300 °C -
荷重 1.2 kg -
成形収縮率, 平行 0.7 % ISO 294-4, 2577
成形収縮率, 直角 0.8 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
引張弾性率 2400 MPa ISO 527
降伏応力 66 MPa ISO 527
降伏ひずみ 6.1 % ISO 527
破壊呼びひずみ >50 % ISO 527
曲げ弾性率, 23°C 2400 MPa ISO 178
曲げ強さ 97 MPa ISO 178
引張クリープ弾性率, 1h 2200 MPa ISO 899-1
引張クリープ弾性率, 1000h 1900 MPa ISO 899-1
シャルピー衝撃強さ, +23°C N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 75 kJ/m² ISO 179/1eA
Type of failure P - -
ノッチ付きシャルピー衝撃強さ, -30ﾟC 16 kJ/m² ISO 179/1eA
Type of failure C - -
ノッチ付きIzod衝撃強さ, +23°C 70 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ 15 kJ/m² ISO 180/1A
温度 -30 °C -
パンクチャー衝撃－最大応力, +23°C 5400 N ISO 6603-2
パンクチャー衝撃－最大応力, -30°C 6300 N ISO 6603-2
パンクチャー衝撃エネルギー, +23°C 60 J ISO 6603-2
パンクチャー衝撃エネルギー, -30ﾟC 65 J ISO 6603-2
Ball indentation hardness 115 MPa ISO 2039-1
熱的特性値単位テスト基準
ISO データ
ガラス転移点, 10°C/min 145 °C ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa 125 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 137 °C ISO 75-1/-2
ビカット軟化温度, B 145 °C ISO 306
線膨張係数, 平行 65 E-6/K ISO 11359-1/-2
線膨張係数, 直角 65 E-6/K ISO 11359-1/-2
厚さhでの燃焼性 V-2 class IEC 60695-11-10
試験片の厚さ 0.8 mm -
Yellow Card 可用 はい - -
酸素指数 28 % ISO 4589-1/-2
グローワイヤ燃焼性指数 (GWFI) 850 °C IEC 60695-2-12
GWFI - 試験片の厚さ 1.5 mm -
グローワイヤ燃焼性指数 (GWFI) 930 °C IEC 60695-2-12
GWFI - 試験片の厚さ 3 mm -
グローワイヤ着火温度 (GWIT) 875 °C IEC 60695-2-13
GWIT - 試験片の厚さ 0.75 mm -
グローワイヤ着火温度 (GWIT) 875 °C IEC 60695-2-13
GWIT - 試験片の厚さ 1.5 mm -
グローワイヤ着火温度 (GWIT) 900 °C IEC 60695-2-13
GWIT - 試験片の厚さ 3 mm -
Other Standards[S]
熱伝導率, ソリッド 0.2 W/(m K) ISO 8302
S: These properties are reported by the producer according standards that are different to our defaults.
電気的特性.値単位テスト基準
ISO データ
比誘電率, 100Hz 3.1 - IEC 62631-2-1
比誘電率, 1MHz 3 - IEC 62631-2-1
誘電正接, 100Hz 5 E-4 IEC 62631-2-1
誘電正接, 1MHz 90 E-4 IEC 62631-2-1
体積抵抗率 >1E13 Ohm*m IEC 62631-3-1
表面抵抗率 >1E15 Ohm IEC 62631-3-2
耐電圧 34 kV/mm IEC 60243-1
耐トラッキング性 250 - IEC 60112
光学特性値単位テスト基準
ISO Data
ヘイズ 0.8 - ISO 14782
視感透過率 89 % ISO 13468-1, -2
Other Standards[S]
くっせつりつ 1.59 - ISO 489
S: These properties are reported by the producer according standards that are different to our defaults.
その他の特性.値単位テスト基準
吸水率 0.3 % Sim. to ISO 62
吸湿率 0.12 % Sim. to ISO 62
密度 1200 kg/m³ ISO 1183
Bulk density 660 kg/m³ -
試験片の成形条件.値単位テスト基準
ISO データ
射出成形, 樹脂温度 300 °C ISO 294
射出成形, 金型温度 80 °C ISO 294
射出成形, 射出速度 200 mm/s ISO 294
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 120 °C -
Pre-drying - Time 2 - 3 h -
Processing humidity ≤0.02 % -
樹脂温度 280 - 320 °C -
金型温度 80 - 120 °C -
Zone 1 250 - 260 °C -
Zone 2 270 - 280 °C -
Zone 3 280 - 290 °C -
Nozzle temperature 290 - 300 °C -
Back pressure 5 - 15 MPa -
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット.
添加剤.
離型剤.
特殊な特性.
透明., Opaque, 滅菌可能, エチレンオキシド滅菌(EtO), 蒸気滅菌
Certifications
Contains renewable resources, Recycled Resin Content, Medical Grade, Biocompatibility ISO 10993, ISCC Plus
アプリケーション
医療の
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.