Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Monprene® RG-17240 - TPE-X - Teknor Apex Co.

Material Data Center offers the following functions for Monprene® RG-17240:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Monprene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
機械的特性値単位テスト基準
ISO データ
圧縮永久ひずみ 23℃, 24h 21 % ISO 815
圧縮永久ひずみ 70℃, 24h 39 % ISO 815
ASTM数据
伸び率100％弾性率 1 MPa ASTM D 412
伸び率300％弾性率 0.53 MPa ASTM D 412
ショア硬さA 40 - ASTM D 2240
破壊応力 7.3 MPa ASTM D 412
破断伸び 900 % ASTM D 412
その他の特性.値単位テスト基準
密度. 1050 kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 65 °C -
Pre-drying - Time 2 - 4 h -
樹脂温度 180 - 230 °C -
金型温度 15 - 50 °C -
Zone 1 120 - 160 °C -
Zone 2 160 - 230 °C -
Zone 3 180 - 230 °C -
Nozzle temperature 180 - 230 °C -
Screw speed 50 - 100 rpm -
Back pressure 0.5 - 1.5 MPa -
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット.
添加剤.
滑剤.
特殊な特性.
Opaque
な特性
Good Adhesion
Certifications
Food contact, Food approval FDA 21 CFR
アプリケーション
パッケージング
領域別の利用可能性
北アメリカ., ヨーロッパ., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.