Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Nemcon™ E HDPE 11000 - (PE-HD) - Ovation Polymers

Material Data Center offers the following functions for Nemcon™ E HDPE 11000:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Nemcon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
機械的特性値単位テスト基準
ASTM数据
引張弾性率 820 MPa ASTM D 638
降伏応力 25 MPa ASTM D 638
破壊応力 23 MPa ASTM D 638
破断伸び 13.5 % ASTM D 638
曲げ弾性率 510 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 40 J/m ASTM D 256
熱的特性値単位テスト基準
ASTM数据
DTUL @ 264 psi 50 °C ASTM D 648
電気的特性.値単位テスト基準
ASTM数据
表面抵抗率 3000 Ohm ASTM D 257
その他の特性.値単位テスト基準
密度 990 kg/m³ ASTM D 792
特殊な特性
特殊な特性.
紫外線安定化.
領域別の利用可能性
北アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.