Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® 5533 SN 70 BLACK - TPA-CD... - ARKEMA

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

Pebax® 5533 SN 70 BLACK resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SN 70 grade is made conductive thanks to carbon black.


Main applications:

• Conductive injected parts
• Hose for fuel transportation

Packaging:
This grade is delivered dried in sealed packaging (20 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.

Processing/Physical Characteristics	乾燥/調湿	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	5 / *	cm³/10min	ISO 1133
温度	250 / *	°C	-
荷重	5 / *	kg	-

機械的特性	乾燥/調湿	単位	テスト基準
ISO データ
引張弾性率	305 / 298	MPa	ISO 527
降伏応力	18 / 17	MPa	ISO 527
降伏ひずみ	31 / 36	%	ISO 527
破壊呼びひずみ	>50 / >50	%	ISO 527
ノッチ付きシャルピー衝撃強さ, -30°C	- / 18	kJ/m²	ISO 179/1eA
ショア硬さD	60 / *	-	ISO 7619-1

熱的特性	乾燥/調湿	単位	テスト基準
ISO データ
溶融温度, 10°C/min	159 / *	°C	ISO 11357-1/-3
線膨張係数, 平行	220 / *	E-6/K	ISO 11359-1/-2
1.5mm厚さでの燃焼性	HB / *	class	IEC 60695-11-10
試験片の厚さ	1.6 / *	mm	-
厚さhでの燃焼性	HB / *	class	IEC 60695-11-10
試験片の厚さ	3.2 / *	mm	-

電気的特性.	乾燥/調湿	単位	テスト基準
ISO データ
体積抵抗率	110000 / -	Ohm*m	IEC 62631-3-1
表面抵抗率	* / 5500	Ohm	IEC 62631-3-2

その他の特性.	乾燥/調湿	単位	テスト基準
吸水率	1.2 / *	%	Sim. to ISO 62
吸湿率	0.5 / *	%	Sim. to ISO 62
密度	1090 / 1090	kg/m³	ISO 1183

機能

特殊な特性

成形加工法.

射出成形., フィルム押出成形., 異形押出成形., その他の押出成形., トランスファー成形., 注型., 熱成形.

納入形状.

ペレット., 黒

特殊な特性.

導電., 帯電防止., メッキ性., 光安定化., 紫外線安定化., 熱安定化.

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

その他の情報

村遜速揃

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 200°C / 240°C / 270°C.
- Typical mold temperature : 25 – 60°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 65-75°C.

その他の押出成形.

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 210°C / 220°C / 230°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 65-75°C.

耐薬品性

酸
	38wt％硫酸 (23ﾟC)
塩基
	1wt％水酸化ナトリウム (23ﾟC)
アルコール
	エタノール　23℃ (23ﾟC)
炭化水素
	イソオクタン (23ﾟC)
ケトン系溶剤
	アセトン (23ﾟC)
食塩水
	50wt％ジンクロメート (23ﾟC)
その他
	水 (23ﾟC)

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.