Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® 7033 SP 01 - TPA - ARKEMA

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

Polyether block amide Pebax® 7033 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SP grade has been developed to be heat and UV resistant.


Main applications:

• Athletic foot wear components
• Ski shoes
• Tennis racket bumpers
• Zip fasteners

Packaging:
This grade is delivered dried in sealed packaging (20 or 25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.

機械的特性	乾燥/調湿	単位	テスト基準
ISO データ
引張弾性率	414 / 384	MPa	ISO 527
降伏応力	23 / 22	MPa	ISO 527
降伏ひずみ	22 / 20	%	ISO 527
破壊呼びひずみ	>50 / >50	%	ISO 527
ノッチ付きシャルピー衝撃強さ, +23°C	- / 120	kJ/m²	ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C	- / 20	kJ/m²	ISO 179/1eA
伸び率10%時の応力	22 / *	MPa	ISO 527
伸び率100%時の応力	21 / *	MPa	ISO 527
破壊応力 TPE	54 / *	MPa	ISO 527
破壊ひずみ TPE	>300 / *	%	ISO 527
引裂強さ	149 / *	kN/m	ISO 34-1
ショア硬さD	61 / *	-	ISO 7619-1

熱的特性	乾燥/調湿	単位	テスト基準
ISO データ
溶融温度, 10°C/min	172 / *	°C	ISO 11357-1/-3
荷重たわみ温度, 0.45 MPa	99 / *	°C	ISO 75-1/-2
ビカット軟化温度, B	106 / *	°C	ISO 306
線膨張係数, 平行	160 / *	E-6/K	ISO 11359-1/-2

電気的特性.	乾燥/調湿	単位	テスト基準
ISO データ
表面抵抗率	* / 4E13	Ohm	IEC 62631-3-2
耐トラッキング性	* / 600	-	IEC 60112

その他の特性.	乾燥/調湿	単位	テスト基準
吸水率	1.1 / *	%	Sim. to ISO 62
吸湿率	0.7 / *	%	Sim. to ISO 62
密度	1010 / -	kg/m³	ISO 1183

機能

特殊な特性

成形加工法.

射出成形., フィルム押出成形., 異形押出成形., その他の押出成形., トランスファー成形., 注型., 熱成形.

納入形状.

ペレット.

特殊な特性.

メッキ性., 光安定化., 紫外線安定化., 熱安定化.

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

その他の情報

村遜速揃

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 230°C / 260°C / 290°C
- Typical mold temperature : 25 – 60°C
- Drying time and temperature (only necessary for bags opened for more than two hours) : 5-7 hours at 70-80°C

その他の押出成形.

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 220°C / 235°C / 250°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 5-7 hours at 70-80°C.

耐薬品性

酸
	38wt％硫酸 (23ﾟC)
塩基
	1wt％水酸化ナトリウム (23ﾟC)
アルコール
	エタノール　23℃ (23ﾟC)
炭化水素
	イソオクタン (23ﾟC)
ケトン系溶剤
	アセトン (23ﾟC)
食塩水
	50wt％ジンクロメート (23ﾟC)
その他
	水 (23ﾟC)

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.