Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® Rnew® 1100 - TPA - ARKEMA

Material Data Center offers the following functions for Pebax® Rnew® 1100:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Pebax® Rnew 1100 resin offers an excellent combination of high impact resistance, stiffness and lightness. In addition to high energy return, the main future of Pebax® materials, this grade will bring high performance to a wide range of sport applications: winter sports, team sports…


Pebax® Rnew  1100 resin is produced from a renewable source.



Main applications:
  • Consumer goods
  • Sports equipment

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags).

Shelf life:
Two years from the date of delivery.  For any use above this limit, please refer to our technical services.
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 - / 1100 MPa ISO 527
降伏応力 - / 39 MPa ISO 527
降伏ひずみ - / 5 % ISO 527
破壊呼びひずみ - / >50 % ISO 527
ノッチ付きシャルピー衝撃強さ, +23°C - / 80 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C - / 30 kJ/m² ISO 179/1eA
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10°C/min 187 / * °C ISO 11357-1/-3
その他の特性.乾燥/調湿単位テスト基準
密度 999 / - kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 70 - 80 °C -
Pre-drying - Time 4 - 6 h -
樹脂温度 240 - 280 °C -
金型温度 35 - 40 °C -
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット.
特殊な特性.
高耐衝撃及び耐衝撃改良.
Certifications
Contains renewable resources
アプリケーション
スポーツ用品
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
その他の情報
村遜速揃

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 240°C / 260°C / 280°C.
- Typical mold temperature (mirror polish to get the optimum transparency) : 35-40°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 70-80°C.

Shilf life:
Two years from date of delivery.
For any use above this limit, please refer to our tehnical services.

Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.