Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® 2533 SA 01 - TPA - ARKEMA

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

機械的特性 - 熱的特性 - その他の特性. - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

Polyether block amide Pebax® 2533 SA 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SA grade is specially designed to food uses. Its chemical structure also enables the absorption and the controlled release of volatile molecules (fragrances, oils, insecticides...).


Main applications:

• Flexible injected parts
• Controlled release of volatile molecules (fragrances
• oils
• insecticides
• etc...)
• Note: this grade is not recommended by Arkema for usage in medical applications. For such applications Pebax® SA 01 MED should be used

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags or 550kg rigid containers) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.

機械的特性	乾燥/調湿	単位	テスト基準
ISO データ
引張弾性率	12 / 10	MPa	ISO 527
50%ひずみ時応力	3 / 3	MPa	ISO 527
破壊ひずみ	>50 / >50	%	ISO 527
伸び率10%時の応力	1 / *	MPa	ISO 527
伸び率100%時の応力	4 / *	MPa	ISO 527
伸び率300%時の応力	5 / *	MPa	ISO 527
破壊応力 TPE	32 / *	MPa	ISO 527
破壊ひずみ TPE	>300 / *	%	ISO 527
ショア硬さA	74 / *	-	ISO 7619-1
ショア硬さD	22 / *	-	ISO 7619-1

熱的特性	乾燥/調湿	単位	テスト基準
ISO データ
溶融温度, 10°C/min	134 / *	°C	ISO 11357-1/-3

その他の特性.	乾燥/調湿	単位	テスト基準
吸水率	1.2 / *	%	Sim. to ISO 62
吸湿率	0.4 / *	%	Sim. to ISO 62
密度	1000 / 1000	kg/m³	ISO 1183

機能

特殊な特性

成形加工法.

射出成形.

納入形状.

ペレット.

添加剤.

滑剤.

特殊な特性.

光安定化., 熱安定化.

Certifications

Food contact

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

その他の情報

村遜速揃

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 180°C / 210°C / 240°C.
- Typical mold temperature : 10 – 30°C.
- Drying time and temperature (only necessary for bags/containers opened for more than two hours) : 4-8 hours at 55-65°C.  

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.