Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Premium PLA - PLA - Formfutura BV

Material Data Center offers the following functions for Premium PLA:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Premium datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 光学特性 - その他の特性. - 機械的特性(ィルム)
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
Other Standards[S]
メルトフローレイト, MFI 6 g/10min
S: These properties are reported by the producer according standards that are different to our defaults.
機械的特性値単位テスト基準
Other Standards[S]
曲げ弾性率 2364 MPa
曲げ強さ 54.4 MPa
S: These properties are reported by the producer according standards that are different to our defaults.
熱的特性値単位テスト基準
ASTM数据
溶融温度 210 °C ASTM D 3418
光学特性値単位テスト基準
ASTM数据
光沢度 80[1] - ASTM D 2457
ヘイズ 2.1 % ASTM D 1003
1: 20°
その他の特性.値単位テスト基準
密度 1240 kg/m³ ASTM D 792
機械的特性(ィルム)値単位テスト基準
ASTM Data
引張弾性率, 平行 3140 MPa ASTM D 882
引張強度, 平行 105 MPa ASTM D 882
破断伸び, 平行 175 % ASTM D 882
特殊な特性
成形加工法.
Additive Manufacturing
納入形状.
Monofilament
な特性
Thermal Stability
Certifications
Contains renewable resources
アプリケーション
汎用
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.