Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Promyde® B40 P2 FLX HI - PA6 - Nurel S.A.

Material Data Center offers the following functions for Promyde® B40 P2 FLX HI:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Promyde datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - その他の特性. - 材料特有の特性 - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 650 / 500 MPa ISO 527
引張強度 50 / 35 MPa ISO 527
破壊ひずみ 190 / 200 % ISO 527
曲げ弾性率, 23°C 590 / 450 MPa ISO 178
曲げ強さ 24 / 20 MPa ISO 178
シャルピー衝撃強さ, +23°C N / N kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30ﾟC N / - kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 115 / N kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30ﾟC 16 / - kJ/m² ISO 179/1eA
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 222 / * °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 50 / * °C ISO 75-1/-2
その他の特性.乾燥/調湿単位テスト基準
吸水率. 9.5 / * % Sim. to ISO 62
吸湿率 2.7 / * % Sim. to ISO 62
密度. 1080 / - kg/m³ ISO 1183
材料特有の特性乾燥/調湿単位テスト基準
ISO データ
粘度数. 200 / * cm³/g ISO 307, 1157, 1628
Processing Recommendation Extrusion値単位テスト基準
Type of extrusion pipe/tube - -
Pre-drying - Temperature 80 °C -
Pre-drying - Time 8 h -
樹脂温度 <250 °C -
特殊な特性
成形加工法.
Pipe/Tube Extrusion
特殊な特性.
高耐衝撃及び耐衝撃改良., 熱安定化.
耐薬品性
Oil Resistance
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.