Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Reny 1021UCS - PAMXD6-GF50 - Mitsubishi Engineering-Plastics Corporation

Material Data Center offers the following functions for Reny 1021UCS:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Reny datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
メルトボリュームレイト, MVR 11 / * cm³/10min ISO 1133
温度 275 / * °C -
荷重 2.16 / * kg -
メルトフローレート, MFI 13 g/10min ISO 1133
温度 275 °C -
荷重 2.16 kg -
成形収縮率, 平行 0.3 / * % ISO 294-4, 2577
成形収縮率, 直角 0.7 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 17800 / 14400 MPa ISO 527
破壊応力 252 / 184 MPa ISO 527
破壊ひずみ 2.5 / 3.4 % ISO 527
曲げ弾性率, 23°C 18300 / 13800 MPa ISO 178
曲げ強さ 392 / 305 MPa ISO 178
シャルピー衝撃強さ, +23°C 87 / 100 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 14 / 16 kJ/m² ISO 179/1eA
熱的特性乾燥/調湿単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 217 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 227 / * °C ISO 75-1/-2
厚さhでの燃焼性 HB / * class IEC 60695-11-10
その他の特性.乾燥/調湿単位テスト基準
吸湿率 1.3 / * % Sim. to ISO 62
密度. 1610 / - kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 120 °C -
Pre-drying - Time 3 h -
金型温度 120 - 140 °C -
Zone 1 270 °C -
Zone 2 275 °C -
Zone 3 280 °C -
Nozzle temperature 280 °C -
Screw speed 60 - 150 rpm -
Injection pressure 20 - 150 MPa -
特殊な特性
成形加工法.
射出成形.
特殊な特性.
光安定化., 紫外線安定化.
アプリケーション
自動車, 電気電子, 汎用
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.