Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsamid® AECNO TL - PA12 - ARKEMA

Material Data Center offers the following functions for Rilsamid® AECNO TL:
unit conversion, PDF datasheet print, comparison with other plastics, parameters for material models, CAE Interfaces

Check here, which other Rilsamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
商品の説明文
ISO 16396 - PA12, KGHL, C12-010 

Rilsamid® AECNO TL resin is a natural polyamide 12. 
This grade is designed for cable coating.


Main applications:
  • Wire and cable sheathing

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf life:
Two years from the date of delivery. for any use above this limit, please refer to our technical services.
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 - / 1250 MPa ISO 527
降伏応力 - / 43 MPa ISO 527
降伏ひずみ - / 5 % ISO 527
破壊呼びひずみ - / >50 % ISO 527
ノッチ付きシャルピー衝撃強さ, +23°C - / 5 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C - / 7 kJ/m² ISO 179/1eA
ショア硬さD 71 / * - ISO 7619-1
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10°C/min 178 / * °C ISO 11357-1/-3
その他の特性.乾燥/調湿単位テスト基準
密度 1010 / 1010 kg/m³ ISO 1183
機能
 粘度せん断速度. , Rilsamid® AECNO TL, PA12, ARKEMA
 せん断応力-せん断速度. , Rilsamid® AECNO TL, PA12, ARKEMA
 応力-ひずみ. , Rilsamid® AECNO TL (乾燥), PA12, ARKEMA
 割線弾性率−ひずみ. , Rilsamid® AECNO TL (乾燥), PA12, ARKEMA
特殊な特性
成形加工法.
射出成形., その他の押出成形., コーティング.
納入形状.
ペレット.
添加剤.
滑剤.
特殊な特性.
光安定化., 紫外線安定化., 熱安定化.
領域別の利用可能性
その他の情報
その他の押出成形.
Processing conditions:
Typical melt temperature (Min / recommended / Max): 240°C / 250°C / 260°C
Drying time and temperature (only necessary for bags opened more than two hours): 4 - 8 hours at 80°C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.