Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® TIEFLEX R473 NAT TL - PA* - ARKEMA

Material Data Center offers the following functions for Rilsan® TIEFLEX R473 NAT TL:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Rilsan® TIEFLEX R473 NAT TL resin is a flexible and partially bio based tie layer alloy. This grade is designed for air brake application (tie layer for air brake tubing).

Packaging:
This grade is delivered dried in sealed packaging (25kg bags) ready to be processed.

Shelf life:
Two years from the date of delivery. For any use above this limit, please refer to our technical services.
Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
メルトボリュームレイト, MVR 5.4 / * cm³/10min ISO 1133
温度 235 / * °C -
荷重 5 / * kg -
機械的特性乾燥/調湿単位テスト基準
ISO データ
50%ひずみ時応力 - / 28 MPa ISO 527
破壊ひずみ - / >50 % ISO 527
ノッチ付きシャルピー衝撃強さ, +23°C - / 100 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C - / 11 kJ/m² ISO 179/1eA
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10°C/min 215 / * °C ISO 11357-1/-3
その他の特性.乾燥/調湿単位テスト基準
吸水率 6.7 / * % Sim. to ISO 62
吸湿率 2.1 / * % Sim. to ISO 62
密度 1100 / - kg/m³ ISO 1183
特殊な特性
成形加工法.
その他の押出成形.
納入形状.
ペレット., ナチュラルカラー
Certifications
Contains renewable resources
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
その他の情報
その他の押出成形.
Processing conditions
- Typical melt temperature (min / recommended / max): 230°C / 240°C / 250°C
- Drying time and temperature (only necessary for bags opened for more than two hours): 4-6 hours at 80°C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.