Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® BMNO MED - PA11 - ARKEMA

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.

Any use of this information falls under the rules of our disclaimer.

商品の説明文

PA11, MHL, 12-010
Rilsan® BMNO MED resin is a polyamide 11 produced from a renewable source. This natural grade dedicated to injection offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices.
 
Upon request letters regarding USP Class VI compliance can be provided.




Main applications:

• Medical molded components such as needle fittings for syringes
• Minimally invasive devices

Packaging:
This grade is delivered dried in sealed packaging (44 lb bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.

Processing/Physical Characteristics	乾燥/調湿	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	30 / *	cm³/10min	ISO 1133
温度	235 / *	°C	-
荷重	2.16 / *	kg	-
成形収縮率, 平行	1.1 / *	%	ISO 294-4, 2577
成形収縮率, 直角	0.9 / *	%	ISO 294-4, 2577

機械的特性	乾燥/調湿	単位	テスト基準
ISO データ
引張弾性率	- / 1280	MPa	ISO 527
降伏応力	- / 41	MPa	ISO 527
降伏ひずみ	- / 5	%	ISO 527
破壊呼びひずみ	- / >50	%	ISO 527
ノッチ付きシャルピー衝撃強さ, +23°C	- / 8.3	kJ/m²	ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C	- / 10.5	kJ/m²	ISO 179/1eA
ショア硬さD	68 / *	-	ISO 7619-1

熱的特性	乾燥/調湿	単位	テスト基準
ISO データ
溶融温度, 10°C/min	189 / *	°C	ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa	50 / *	°C	ISO 75-1/-2
荷重たわみ温度, 0.45 MPa	145 / *	°C	ISO 75-1/-2

その他の特性.	乾燥/調湿	単位	テスト基準
密度	1030 / 1030	kg/m³	ISO 1183
Biobased content	100	%	-

特殊な特性

成形加工法.

射出成形.

納入形状.

ペレット.

Certifications

Contains renewable resources, Medical Grade, US Pharmacopeia Class VI Approved

アプリケーション

医療の

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

その他の情報

村遜速揃

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 240°C / 270°C / 290°C.
- Mold temperature : 25 - 60°C

- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 80-90°C.

耐薬品性

酸
	5wt％酢酸 (23ﾟC)
	10wt％クエン酸 (23ﾟC)

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.