Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® HT CESV BLACK P010 TL - PA*-I - ARKEMA

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

PA11/10T-I,,EHL,C16-010

Rilsan® HT CESV BLACK P010 TL  is a flexible polyphthalamide produced from a renewable source, typical used to replace metal in tubing for high-temperature automotive, transportation and other demanding technical  applications.

According to ASTM D6866, the biobased carbon content is measured at 48%.

Main applications:

• Thermoplastic lines for automotive & transportation applications such as high temperature air/vacuum
• aggressive media and oil management systems
• cooling and selective catalyst reduction lines etc
• Hydraulic and pneumatic lines

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit,  please refer to our technical services.

Processing/Physical Characteristics	乾燥/調湿	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	1.9 / *	cm³/10min	ISO 1133
温度	300 / *	°C	-
荷重	5 / *	kg	-

機械的特性	乾燥/調湿	単位	テスト基準
ISO データ
引張弾性率	- / 1015	MPa	ISO 527
降伏応力	- / 30	MPa	ISO 527
降伏ひずみ	- / 5	%	ISO 527
破壊呼びひずみ	- / >50	%	ISO 527
ノッチ付きシャルピー衝撃強さ, +23°C	- / 84	kJ/m²	ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C	- / 16	kJ/m²	ISO 179/1eA
ショア硬さD	66 / *	-	ISO 7619-1

熱的特性	乾燥/調湿	単位	テスト基準
ISO データ
溶融温度, 10°C/min	260 / *	°C	ISO 11357-1/-3
ガラス転移点, 10°C/min	82 / *	°C	ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa	66 / *	°C	ISO 75-1/-2
荷重たわみ温度, 0.45 MPa	82 / *	°C	ISO 75-1/-2

その他の特性.	乾燥/調湿	単位	テスト基準
密度	1050 / -	kg/m³	ISO 1183
Biobased content	45	%	-

機能

特殊な特性

成形加工法.

異形押出成形., その他の押出成形.

納入形状.

ペレット., 黒

特殊な特性.

高耐衝撃及び耐衝撃改良., 光安定化., 紫外線安定化., 熱安定化.

Certifications

Contains renewable resources

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

その他の情報

族臓遜造揃

Processing conditions :
- Typical  melt temperature (Min / Recommended / Max) : 270°C / 280°C / 290°C.
- Drying time and temperature (only for bags opened for more than two hours) :  8 - 12 hours  at 70 °C.

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.