Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SCHULADUR® A MV 14 - PBT - LyondellBasell Industries

Check here, which other Schuladur datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

PBT standard grade

Processing/Physical Characteristics	値	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	15	cm³/10min	ISO 1133
温度	250	°C	-
荷重	2.16	kg	-

機械的特性	値	単位	テスト基準
ISO データ
引張弾性率	2600	MPa	ISO 527
降伏応力	55	MPa	ISO 527
降伏ひずみ	4	%	ISO 527
シャルピー衝撃強さ, +23°C	N	kJ/m²	ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C	8	kJ/m²	ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C	7	kJ/m²	ISO 179/1eA

熱的特性	値	単位	テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa	55	°C	ISO 75-1/-2
荷重たわみ温度, 0.45 MPa	150	°C	ISO 75-1/-2
1.5mm厚さでの燃焼性	HB	class	IEC 60695-11-10
試験片の厚さ	1.5	mm	-
Yellow Card 可用	はい	-	-
厚さhでの燃焼性	HB	class	IEC 60695-11-10
試験片の厚さ	3.0	mm	-
Yellow Card 可用	はい	-	-

電気的特性.	値	単位	テスト基準
ISO データ
体積抵抗率	>1E13	Ohm*m	IEC 62631-3-1
表面抵抗率	>1E15	Ohm	IEC 62631-3-2
耐トラッキング性	600	-	IEC 60112

その他の特性.	値	単位	テスト基準
密度	1310	kg/m³	ISO 1183

Processing Recommendation Injection Molding	値	単位	テスト基準
Pre-drying - Temperature	120	°C	-
Pre-drying - Time	2 - 4	h	-
樹脂温度	250 - 260	°C	-
金型温度	70 - 90	°C	-

機能

特殊な特性

成形加工法.

射出成形.

納入形状.

顆粒.

添加剤.

離型剤.

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

その他の情報

村遜速揃

PREPROCESSING; Pretreatment
Predrying: 2-4 h / 120°C

PROCESSING ;Processing:

Melttemperature	250 - 260	°C
Mouldtemperature	70 - 90	°C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.