Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Starpylen MX05039 - PP-MX - Eurostar Engineering Plastics

Material Data Center offers the following functions for Starpylen MX05039:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Starpylen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
機械的特性単位テスト基準
ISO データ
引張弾性率 1900 MPa ISO 527
降伏応力 22 MPa ISO 527
降伏ひずみ 3.9 % ISO 527
破壊応力 18 MPa ISO 527
曲げ弾性率, 23°C 1900 MPa ISO 178
アイゾット衝撃試験, +23°C 50 kJ/m² ISO 180/1U
ノッチ付きIzod衝撃強さ, +23°C 5 kJ/m² ISO 180/1A
熱的特性単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 63 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 99 °C ISO 75-1/-2
線膨張係数, 平行 105 E-6/K ISO 11359-1/-2
線膨張係数, 直角 139 E-6/K ISO 11359-1/-2
その他の特性.単位テスト基準
吸水率. 0.03 % Sim. to ISO 62
密度. 1050 kg/m³ ISO 1183
特殊な特性
成形加工法.
射出成形., その他の押出成形.
納入形状.
ペレット.
な特性
Low Odor, Copolymer, Impact Copolymer
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.