Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Systalen LD-C12200 bk000 - (PE-LD) - Systec Plastics GmbH

Material Data Center offers the following functions for Systalen LD-C12200 bk000:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Systalen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - その他の特性. - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
商品の説明文
For more detailed information, please read our brochure p. 46 to 54
or contact our representatives in your region.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 0.9 g/10min ISO 1133
温度 190 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 350 MPa ISO 527
引張強度 18 MPa ISO 527
破壊ひずみ 400 % ISO 527
ノッチ付きシャルピー衝撃強さ, +23°C 70 kJ/m² ISO 179/1eA
その他の特性.値単位テスト基準
密度. 940 kg/m³ ISO 1183
Processing Recommendation Extrusion値単位テスト基準
Pre-drying - Temperature 70 - 80 °C -
Pre-drying - Time 2 h -
特殊な特性
成形加工法.
その他の押出成形., ブロー成形.
納入形状.
ペレット., 黒
Certifications
Recycled Resin Content
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.