Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of THERMOLAST® M TM4MED - TPE - KRAIBURG TPE GmbH & Co. KG

Material Data Center offers the following functions for THERMOLAST® M TM4MED:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Thermolast datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Typical Markets/ Application Sectors:
•    Medical application

Application Examples:
•    Seals
•    Mouthpieces
•    Valves
•    Soft touch
•    Flexible connections
•    Medical tubes

Material Advantage:
•    Applicaton up to indirect blood contact
•    Tested acord. USP Class IV and ISO 10993-5
•    Tested according to ISO 10993-11, ISO 10993- 10, USP 6.6.1
•    Adhesion to PP und HDPE
•    Adapted for injection moulding and extrusion
•    Very good compression set
•    sterilizable (autoclave 134°C, gammaradiation 2x35 kGy, EtO)
機械的特性値単位テスト基準
ISO データ
引張強度 8 MPa ISO 37
破壊ひずみ 800 % ISO 37
圧縮永久ひずみ 70℃, 24h 26 % ISO 815
圧縮永久ひずみ 100℃, 24h 43 % ISO 815
引裂強さ 11.5 kN/m ISO 34-1
ショア硬さA 36 - ISO 7619-1
その他の特性.値単位テスト基準
密度. 880 kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 60 - 80 °C -
Pre-drying - Time 2 - 4 h -
樹脂温度 200 - 250 °C -
金型温度 25 - 40 °C -
Zone 1 180 - 200 °C -
Zone 2 200 - 220 °C -
Zone 3 220 - 250 °C -
Injection pressure 20 - 100 MPa -
Back pressure 2 - 10 MPa -
後硬化時間 8 - 60 MPa -
Maximum residence time 10 min -
特殊な特性
成形加工法.
射出成形., その他の押出成形.
特殊な特性.
Translucent, 滅菌可能, エチレンオキシド滅菌(EtO), 蒸気滅菌, Gamma irradiation sterilization
な特性
Good Adhesion, Soft Feel, Weldable
耐薬品性
Radiation Resistance
Certifications
Medical Grade, Biocompatibility ISO 10993, US Pharmacopeia Class VI Approved, Drug Master File, Long term supply assurance, RoHS, REACH
アプリケーション
医療の
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.