Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TIPELIN FS 340-03 - (PE-MD) - MOL Petrochemicals Co. Ltd.

Material Data Center offers the following functions for TIPELIN FS 340-03:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tipelin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - 機械的特性(ィルム) - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 0.17 g/10min ISO 1133
温度 190 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
ショア硬さD 60 - ISO 7619-1
熱的特性値単位テスト基準
ISO データ
ビカット軟化温度, A 118 °C ISO 306
その他の特性.値単位テスト基準
密度. 935 kg/m³ ISO 1183
機械的特性(ィルム)値単位テスト基準
ISO データ
降伏応力, 平行 25 MPa ISO 527-3
降伏応力, normal 18 MPa ISO 527-3
破壊応力, 平行 51 MPa ISO 527-3
破壊応力, 直角 40 MPa ISO 527-3
最大ひずみ, 平行 700 % ISO 527-3
最大ひずみ, 直角 800 % ISO 527-3
エルメンドルフ引裂抵抗, 平行 0.53 N ISO 6383-2
エルメンドルフ引裂抵抗, 直角 3.6 N ISO 6383-2
自由落下ダート衝撃A 95 g ISO 7765-1
押出成形のタイプ. blown - -
試験片の厚さ. 0.025 mm -
Processing Recommendation Extrusion値単位テスト基準
Type of extrusion blown - -
樹脂温度 180 - 220 °C -
特殊な特性
成形加工法.
Blown Film Extrusion, フィルム押出成形.
納入形状.
ペレット.
な特性
Blending Resin, Copolymer, Hexene Copolymer
耐薬品性
Acid Resistance, Oxidation Resistance
Certifications
Food contact, Food approval 1935/2004/EC, Food approval 10/2011, Food approval FDA 21 CFR, RoHS
アプリケーション
電気電子, 医療の, パッケージング
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.