Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Topas® 6013F-04 - COC - Topas Advanced Polymers

Material Data Center offers the following functions for Topas® 6013F-04:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Topas datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 熱的特性 - 光学特性 - その他の特性. - 機械的特性(ィルム) - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 1 cm³/10min ISO 1133
温度 230 °C -
荷重 2.16 kg -
熱的特性値単位テスト基準
ISO データ
ガラス転移点, 10ﾟC/min 138 °C ISO 11357-1/-2
光学特性値単位テスト基準
ISO Data
光沢度, 60° 100 - ISO 2813
ヘイズ 1 - ISO 14782
その他の特性.値単位テスト基準
密度. 1020 kg/m³ ISO 1183
機械的特性(ィルム)値単位テスト基準
ISO データ
引張弾性率, 平行 2400 MPa ISO 527-3
引張弾性率, 直角 2250 MPa ISO 527-3
破壊応力, 平行 55 MPa ISO 527-3
破壊応力, 直角 45 MPa ISO 527-3
最大ひずみ, 平行 2.4 % ISO 527-3
最大ひずみ, 直角 2.2 % ISO 527-3
押出成形のタイプ. cast - -
試験片の厚さ. 0.07 mm -
Processing Recommendation Extrusion値単位テスト基準
Type of extrusion film - -
Feed temperature 20 - 70 °C -
Zone 1 230 - 240 °C -
Zone 2 250 - 260 °C -
Zone 3 250 - 260 °C -
Zone 4 250 - 260 °C -
Nozzle temperature 230 - 240 °C -
特殊な特性
成形加工法.
射出成形., フィルム押出成形., その他の押出成形., 熱成形.
な特性
Barrier Properties, Blending Resin
Certifications
Food contact
アプリケーション
医療の, パッケージング
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.