Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tritan™ LX200 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Tritan™ LX200:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tritan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - 光学特性 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文

Eastman Tritan™ LX200 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. Eastman Tritan™ LX200 was developed for the cosmetic, fragrance, and personal care markets. Tritan™ LX200 can easily be converted into articles for application in Consumer and Personal Care markets by injection molding, extrusion blow molding, and injection blow molding.

機械的特性値単位テスト基準
ASTM数据
引張弾性率 1585 MPa ASTM D 638
降伏応力 44 MPa ASTM D 638
破壊応力 53 MPa ASTM D 638
降伏点伸び 7 % ASTM D 638
破断伸び 140 % ASTM D 638
曲げ弾性率 1585 MPa ASTM D 790
ロックウェル硬度 R 115 - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in 650 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 126 J/m ASTM D 256
温度 -40 °C -
アイゾット衝撃試験, 1/8 in N J/m ASTM D 256
熱的特性値単位テスト基準
ASTM数据
DTUL @ 66 psi 109 °C ASTM D 648
DTUL @ 264 psi 92 °C ASTM D 648
光学特性値単位テスト基準
ASTM数据
ヘイズ 1 % ASTM D 1003
視感透過率 92 % ASTM D 1003
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 88 °C -
Pre-drying - Time 4 - 6 h -
樹脂温度 260 - 282 °C -
金型温度 38 - 66 °C -
特殊な特性
成形加工法.
射出成形., ブロー成形.
特殊な特性.
高耐衝撃及び耐衝撃改良., 熱安定化., 透明.
な特性
Amorphous, Copolymer
耐薬品性
General Chemical Resistance, Hydrolytically Stable
アプリケーション
パッケージング
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.