Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tritan™ MP150 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Tritan™ MP150:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tritan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 光学特性 - その他の特性. - 機械的特性(ィルム) - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
商品の説明文

Eastman Tritan copolyester MP150 is a high flow grade of Eastman Tritan. Eastman Tritan copolyester MP150 has viscosity reductions of 40-50% relative to Eastman Tritan copolyester MP100. It is intended for use in extrusion coating processes or where high melt flow rate is desirable.

Other outstanding features include good toughness, hydrolytic stability, and heat and chemical resistance.

Eastman Tritan copolyester MP150 may be used in food contact applications with restrictions and is compliant with applicable and select sections of USP 35 <661>, ISO10993, and ISO11607.

Processing/Physical Characteristics値単位テスト基準
ASTM数据
成形収縮率., 平行 0.006 mm/mm ASTM D 955
機械的特性値単位テスト基準
ASTM数据
引張弾性率 1575 MPa ASTM D 638
降伏応力 43 MPa ASTM D 638
破壊応力 52 MPa ASTM D 638
降伏点伸び 7 % ASTM D 638
破断伸び 210 % ASTM D 638
曲げ弾性率 1575 MPa ASTM D 790
ロックウェル硬度 R 111 - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in 860 J/m ASTM D 256
アイゾット衝撃試験, 1/8 in N J/m ASTM D 256
熱的特性値単位テスト基準
ASTM数据
DTUL @ 66 psi 94 °C ASTM D 648
DTUL @ 264 psi 81 °C ASTM D 648
ガラス転移温度 110 °C ASTM E 1356
光学特性値単位テスト基準
ASTM数据
ヘイズ 1 % ASTM D 1003
視感透過率 91 % ASTM D 1003
その他の特性.値単位テスト基準
密度 1180 kg/m³ ASTM D 792
機械的特性(ィルム)値単位テスト基準
ASTM Data
引張弾性率, 平行 979 MPa ASTM D 882
破壊応力, 平行 56.5 MPa ASTM D 882
破断伸び, 平行 217 % ASTM D 882
試験片の厚さ 0.127 mm -
Processing Recommendation Extrusion値単位テスト基準
Pre-drying - Temperature 88 °C -
Pre-drying - Time 4 - 6 h -
樹脂温度 260 - 282 °C -
金型温度 38 - 66 °C -
特殊な特性
成形加工法.
コーティング., 熱成形.
特殊な特性.
熱安定化., 透明.
な特性
Copolymer
耐薬品性
General Chemical Resistance, Hydrolytically Stable
Certifications
Food contact, Medical Grade, Biocompatibility ISO 10993, US Pharmacopeia Class VI Approved
アプリケーション
医療の, パッケージング
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.