Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TROGAMID® myCX high flow - PAPACM12 - Evonik Operations GmbH

Material Data Center offers the following functions for TROGAMID® myCX high flow:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Trogamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Microcrystalline, permanently transparent polyamide

TROGAMID® myCX high flow is a microcrystalline transparent polyamide for the manufacture of parts in the optical industry, like lenses according the injection molding procedure. 

TROGAMID® myCX high flow is supplied as spherical pellets in moisture-proof packaging.

Pigmentation may affect values.

For information about processing of TROGAMID®, please follow the general commendations about “Processing of TROGAMID® compounds”. 
 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.TROGAMID.COM

Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
メルトボリュームレイト, MVR 11 / * cm³/10min ISO 1133
温度 280 / * °C -
荷重 2.16 / * kg -
成形収縮率, 平行 0.7 / * % ISO 294-4, 2577
成形収縮率, 直角 0.7 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 1480 / 1490 MPa ISO 527
降伏応力 59 / 63 MPa ISO 527
降伏ひずみ 8 / 7 % ISO 527
破壊呼びひずみ >50 / >50 % ISO 527
シャルピー衝撃強さ, +23°C N / N kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C N / N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 11 / 12 kJ/m² ISO 179/1eA
Type of failure C / C - -
ノッチ付きシャルピー衝撃強さ, -30°C 11 / 12 kJ/m² ISO 179/1eA
Type of failure C / C - -
ショア硬さD 81 / * - ISO 7619-1
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10°C/min 247 / * °C ISO 11357-1/-3
ガラス転移点, 10°C/min 135 / * °C ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa 102 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 120 / * °C ISO 75-1/-2
ビカット軟化温度, B 127 / * °C ISO 306
線膨張係数, 平行 92 / * E-6/K ISO 11359-1/-2
線膨張係数, 直角 96 / * E-6/K ISO 11359-1/-2
その他の特性.乾燥/調湿単位テスト基準
吸水率 3 / * % Sim. to ISO 62
吸湿率 2 / * % Sim. to ISO 62
密度 1020 / - kg/m³ ISO 1183
特殊な特性
成形加工法.
射出成形., フィルム押出成形., その他の押出成形.
納入形状.
顆粒.
特殊な特性.
透明.
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.