Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ubesta 3035 LU 1 - PA12 - UBE

Material Data Center offers the following functions for Ubesta 3035 LU 1:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ubesta datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 1 g/10min ISO 1133
温度 235 °C -
荷重 2.16 kg -
成形収縮率, 平行 0.7 % ISO 294-4, 2577
成形収縮率, 直角 1.5 % ISO 294-4, 2577
ASTM数据
メルトフローレイト, MFI 1.3 g/10min ASTM D 1238
温度 235 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
降伏応力 50 MPa ISO 527
降伏ひずみ 4 % ISO 527
破壊ひずみ >50 % ISO 527
曲げ弾性率, 23°C 1500 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C 20 kJ/m² ISO 179/1eA
ショア硬さD 79 - ISO 7619-1
ロックウェル硬度 R 107 - ISO 2039-2
ASTM数据
降伏応力 46 MPa ASTM D 638
破壊応力 56 MPa ASTM D 638
破断伸び 250 % ASTM D 638
曲げ弾性率 1590 MPa ASTM D 790
曲げ強さ 61 MPa ASTM D 790
ロックウェル硬度 R 112 - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in 86.5 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 178 °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 45 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 105 °C ISO 75-1/-2
線膨張係数, 平行 120 E-6/K ISO 11359-1/-2
ASTM数据
DTUL @ 66 psi 149 °C ASTM D 648
溶融温度 178 °C ASTM D 3418
電気的特性.値単位テスト基準
ISO データ
体積抵抗率 1E12 Ohm*m IEC 62631-3-1
その他の特性.値単位テスト基準
密度. 1020 kg/m³ ISO 1183
密度 1020 kg/m³ ASTM D 792
特殊な特性
成形加工法.
その他の押出成形., コーティング.
納入形状.
黒
特殊な特性.
熱安定化.
領域別の利用可能性
北アメリカ., ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.