Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultradur® B 4315 G6 HR - PBT-I-GF30 - BASF

Check here, which other Ultradur datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 材料特有の特性 - Processing Recommendation Injection Molding - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

Injection-moulding grade containing 30% glass-fibres, for rigid,tough and dimensionally stable technical parts, used in applications with highest demands on hydrolysis resistance such es automotive connectors and housings for electronic units under the hood.
The black colored product Ultradur® B4315 G6 HR BK15045 has a LS coloration (Laser Sensitive) and can be marked with Nd:YAG lasers.

Abbreviated designation according to ISO 1043: PBT-I-GF30

Processing/Physical Characteristics	値	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	15	cm³/10min	ISO 1133
温度	275	°C	-
荷重	2.16	kg	-
成形収縮率, 平行	0.5	%	ISO 294-4, 2577
成形収縮率, 直角	1.1	%	ISO 294-4, 2577

機械的特性	値	単位	テスト基準
ISO データ
引張弾性率	9200	MPa	ISO 527
破壊応力	130	MPa	ISO 527
破壊ひずみ	3.2	%	ISO 527
シャルピー衝撃強さ, +23°C	75	kJ/m²	ISO 179/1eU
シャルピー衝撃強さ, -30°C	65	kJ/m²	ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C	10	kJ/m²	ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C	8	kJ/m²	ISO 179/1eA

熱的特性	値	単位	テスト基準
ISO データ
溶融温度, 10°C/min	223	°C	ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa	205	°C	ISO 75-1/-2
1.5mm厚さでの燃焼性	HB	class	IEC 60695-11-10

電気的特性.	値	単位	テスト基準
ISO データ
耐トラッキング性	400	-	IEC 60112

その他の特性.	値	単位	テスト基準
密度	1510	kg/m³	ISO 1183

材料特有の特性	値	単位	テスト基準
ISO データ
粘度数	103	cm³/g	ISO 307, 1157, 1628

Processing Recommendation Injection Molding	値	単位	テスト基準
Pre-drying - Temperature	80 - 120	°C	-
Pre-drying - Time	4	h	-
Processing humidity	≤0.04	%	-
樹脂温度	250 - 280	°C	-
金型温度	60 - 100	°C	-

機能

特殊な特性

成形加工法.

射出成形.

特殊な特性.

高耐衝撃及び耐衝撃改良.

耐薬品性

Hydrolytically Stable

アプリケーション

自動車, 電気電子

その他の情報

村遜速揃

PREPROCESSING
Pre/Post-processing, max. allowed water content: .04 %
Pre/Post-processing, Pre-drying, Temperature: 80 - 120 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 250 - 280 °C
injection molding, Melt temperature, recommended: 260 °C
injection molding, Mold temperature, range: 60 - 100 °C
injection molding, Mold temperature, recommended: 80 °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.