Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultraform® FK61002 AT - POM - BASF

Material Data Center offers the following functions for Ultraform® FK61002 AT:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultraform datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 熱的特性 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Polyoxymethylene based batch with approx. 20 weight % carbon black for coloring thermoplastic polyoxymethylenes. Recommended concentrations of FK61002 batch within the mixture with thermoplastic polyoxymethylenes are in the range of 1 to 2 %. Higher concentrations (up to 10 %) may yield further improved UV stability but will reduce toughness.

Abbreviated designation according to ISO 1043-1: POM
Designation according to ISO 29988-POM-K
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 45 cm³/10min ISO 1133
温度 190 °C -
荷重 10 kg -
熱的特性値単位テスト基準
ISO データ
溶融温度, 10°C/min 165 °C ISO 11357-1/-3
Processing Recommendation Injection Molding値単位テスト基準
樹脂温度 190 - 230 °C -
特殊な特性
な特性
Copolymer
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
その他の情報
村遜速揃
PROCESSING
injection molding, Melt temperature, range: 190 - 230 °C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.