Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultraform® H4320 UN Q600 - POM - BASF

Check here, which other Ultraform datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

High-molecular-weight grade for the extrusion of semifinished product; particularly thick walled product can be extruded at
high output rates; the material also features high thermal stability and low discoloration.

Abbreviated designation according to ISO 1043-1: POM
Designation according to ISO 29988-POM-K,,E-GNR,1-2

Processing/Physical Characteristics	値	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	2.6	cm³/10min	ISO 1133
温度	190	°C	-
荷重	2.16	kg	-

機械的特性	値	単位	テスト基準
ISO データ
引張弾性率	2450	MPa	ISO 527
降伏応力	61	MPa	ISO 527
降伏ひずみ	11	%	ISO 527
破壊呼びひずみ	40	%	ISO 527
引張クリープ弾性率, 1h	2000	MPa	ISO 899-1
引張クリープ弾性率, 1000h	1300	MPa	ISO 899-1
ノッチ付きシャルピー衝撃強さ, +23°C	7	kJ/m²	ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C	7	kJ/m²	ISO 179/1eA

熱的特性	値	単位	テスト基準
ISO データ
溶融温度, 10°C/min	165	°C	ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa	93	°C	ISO 75-1/-2
荷重たわみ温度, 0.45 MPa	154	°C	ISO 75-1/-2
線膨張係数, 平行	110	E-6/K	ISO 11359-1/-2
1.5mm厚さでの燃焼性	HB	class	IEC 60695-11-10
試験片の厚さ	1.6	mm	-
Yellow Card 可用	はい	-	-
厚さhでの燃焼性	HB	class	IEC 60695-11-10
Yellow Card 可用	はい	-	-

電気的特性.	値	単位	テスト基準
ISO データ
比誘電率, 100Hz	3.8	-	IEC 62631-2-1
比誘電率, 1MHz	3.8	-	IEC 62631-2-1
誘電正接, 100Hz	10	E-4	IEC 62631-2-1
誘電正接, 1MHz	65	E-4	IEC 62631-2-1
体積抵抗率	1E12	Ohm*m	IEC 62631-3-1
表面抵抗率	1E15	Ohm	IEC 62631-3-2
耐電圧	40	kV/mm	IEC 60243-1
耐トラッキング性	600	-	IEC 60112

その他の特性.	値	単位	テスト基準
吸水率	0.8	%	Sim. to ISO 62
吸湿率	0.2	%	Sim. to ISO 62
密度	1400	kg/m³	ISO 1183

機能

特殊な特性

成形加工法.

射出成形., フィルム押出成形., 異形押出成形., シート押出成形., その他の押出成形.

納入形状.

ペレット.

添加剤.

離型剤.

な特性

Color Stability, Thermal Stability

領域別の利用可能性

北アメリカ.

その他の情報

村遜速揃

PREPROCESSING
Pre/Post-processing, max. allowed water content: .2 %
Pre/Post-processing, Pre-drying, Temperature: 100 °C
Pre/Post-processing, Pre-drying, Time: 3 h

PROCESSING
injection molding, Melt temperature, range: 190 - 230 °C
injection molding, Melt temperature, recommended: 200 °C
injection molding, Mold temperature, range: 60 - 120 °C
injection molding, Mold temperature, recommended: 90 °C
injection molding, Dwell time, thermoplastics: 10 min

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.