Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrafuse PLA PRO1 - PLA - BASF

Material Data Center offers the following functions for Ultrafuse PLA PRO1:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultrafuse datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 熱的特性 - その他の特性. - 3D Data
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 18.2 cm³/10min ISO 1133
温度 210 °C -
荷重 2.16 kg -
熱的特性値単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 175 °C ISO 11357-1/-3
ガラス転移点, 10ﾟC/min 63 °C ISO 11357-1/-2
その他の特性.値単位テスト基準
密度. 1250 kg/m³ ISO 1183
3D Data値単位テスト基準
Other Standards[S]
引張弾性率, flat 3170 MPa ISO 527
引張弾性率, upright 2930 MPa ISO 527
引張強度, flat 48 MPa ISO 527
引張強度, upright 21.8 MPa ISO 527
破壊ひずみ, flat 21.9 % ISO 527
破壊ひずみ, upright 0.9 % ISO 527
曲げ弾性率, flat 2820 MPa ISO 178
曲げ弾性率, on-edge 2340 MPa ISO 178
曲げ強さ, flat 92.4 MPa ISO 178
曲げ強さ, on-edge 99.1 MPa ISO 178
シャルピー衝撃強さ, +23°C, flat 20.4 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, +23°C, on-edge 18.8 kJ/m² ISO 179/1eU
S: These properties are reported by the producer according standards that are different to our defaults.
特殊な特性
成形加工法.
Additive Manufacturing
納入形状.
Monofilament
Certifications
Contains renewable resources
領域別の利用可能性
北アメリカ., ヨーロッパ., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.